Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
8
8
8
8
8
Tare weighing and add-on weighing
8
8
8
8
8
0
8
8
8
8
8
0
2
8
5
0
2
8
5
3
Check weighing
2
8
5
3
2
3
5
0
3
2
3
5
0
Total weight display
CAL
2
3
5
0
CAL0
CAL
8
8
8
8
8
LOAD
CAL0
Switching off
CAL
2000
LOAD
0
CAL0
5000
2000
LOAD
DONE
5000
2
8
5
2000
DONE
Clear tare
5000
3
DONE
User calibration
2
3
5
0
CAL
CAL0
LOAD
2000
5000
DONE
10
Place the container on the base. Press the
Place the weighing goods on the scale.
Add-on weighing: Press the
the additional weighing goods. You can keep doing this up to the
maximum load weight.
Place the reference object on the scale. Tare. Remove the reference
object. Place the object under test on the scale and read off the
plus/minus difference on the display.
When objects are on the scale, press the
Remove the goods for weighing. The total weight appears with a
minus sign.
When the display shows
scale with batteries or rechargeable batteries, the auto-off function
is active. When the display shows
cally after 2 minutes.
When the scale is empty, press the
Turn on the scale
press
key for three times, to enter calibration mode. At this
moment, LCD display will show its Zero Counts.
Press
Key to zero the counts showed.
Then load the calibration weight according to its capacity (500 g
or 5 kg).
Press
key again to calibrate the scale.
Wait till "CAL" disappears. Unload the calibration weight and test the
scale.
key again until
0
, press the
0
, the scale switches off automati-
key again.
, press and hold
0
key.
is displayed.
0
is displayed. Add
0
key.
is displayed.
key. When operating the
key for one second then
Publicité
Table des Matières
