DeWalt DCS571 Guide D'utilisation page 13


WARNING: To reduce the risk of serious personal
injury, ALWAYS hold securely in anticipation of a
sudden reaction.
Proper hand position requires one hand on the main
handle 18 or, if the auxiliary handle is attached, one hand
on the main handle and one hand on the auxiliary
18
handle .
13
Fig. J
13
Trigger Switch (Fig. A)

WARNING: This tool has no provision to lock the
trigger switch in the ON position and should never be
locked ON by any other means.
Release the trigger switch lock-off button
the lock-off button. Pull the trigger switch
motor on. At this time you can let go of the lock-off button.
Releasing the trigger switch turns the motor off.
Dust Extraction (Fig. K, L)
Your saw has a built-in dust port
the supplied dust bag 25 or a shop vacuum system to
be connected. The built-in dust port utilizes the D
AirLock connection making it compatible with the D
dust extractors.
To Attach a Dust Extractor (Fig. K)
Your D WALT circular saw is fitted with the D
e
AirLock® connection system. The AirLock® allows for a fast,
secure connection between the dust extractor and power
tool. The AirLock® connector
D WALT compatible tools.
e
1. Ensure the collar on the AirLock® connector is in the
unlock position. (Refer to Figure K.) Align notches
collar and AirLock® connector as shown for unlock and
lock positions.
2. Push the AirLock® connector onto the adapter
connector point.
18
18
by pressing
1
to turn the
2
which allows either
22
WALT
e
WALT
e
WALT
e
connects directly to
23
24
3. Rotate the collar to the locked position.
nOTE: The ball bearings inside collar lock into slot and
secure the connection.The power tool is now securely
connected to the dust extractor.
Fig. K
24
To Attach the Dust Bag (Fig. L)
1. While holding the saw, fit the dust bag collar
dust port 22 as shown in Figure L.
2. Turn the collar 26
in place.
Fig. L
To Empty the Dust Bag (Fig. L)
1. While holding the saw, turn the collar
counterclockwise to unlock the dust bag
2. Remove dust bag from the saw and gently shake or tap
the dust bag to empty.
3. Reattach the dust bag back onto the dust port and lock
into place by turning the dust bag collar clockwise.
You may notice that all the dust will not come free from
the bag. This will not affect sanding performance but will
reduce the saw's dust collection efficiency. To restore your
saw's dust collection efficiency, depress the spring inside
the dust bag when you are emptying it and tap it on the
side of the trash can or dust receptacle.
Lower Blade Guard

WARNING: The lower blade guard is a safety
feature which reduces the risk of serious
personal injury. Never use the saw if the lower
on
blade guard is missing, damaged, misassembled
or not working properly. Do not rely on the
lower blade guard to protect you under all
circumstances. Your safety depends on following
all warnings and precautions as well as proper
operation of the saw. Prior to use, the check
lower guard operation by manually opening the
English
23
26
clockwise to lock the dust bag
25 26
26
25 .
24
to the
25
22
11