Hitachi Koki CH 36DL Mode D'emploi page 5

SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CH36DL: Cordless Hedge Trimmer
Read all safety warnings and all instructions.
Do not use a power tool in the rain and moisture
or leave it outdoors when it is raining.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Switching ON
Switching OFF
Removing the battery
Selector button
1 LED illuminated: 1000 min
SPECIFICATIONS
Model
No-load speed
Blade size (Trimming width)
Rechargeable battery
Weight
Continuous operating time (depending on the work
conditions)
Model
Charging voltage
Weight
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to a receptacle.
When connecting the plug of the charger to a receptacle,
the pilot lamp will blink in red (At 1-second intervals).
-1
UC36YRSL
14.4 V – 36 V
0.7 kg
2 LEDs illuminated: 1170 min
3 LEDs illuminated: 1330 min
4 LEDs illuminated: 1500 min
2 LEDs illuminated : Suffi cient battery remains.
1 LED illuminated : Battery half-empty
No LED illuminated : Battery very low. Please
STANDARD ACCESSORIES
In addition to the main unit, the package contains the
accessories listed in the table below.
Charger
Battery
Blade case
Battery cover
Standard accessories are subject to change without notice.
APPLICATIONS
○ Fine trimming hedges
○ Trimming and pruning garden trees
CH36DL
1000 – 1500 min
560 mm
BSL3620: Li-ion 36 V (2.0 Ah 10 cells)
4.0 kg
Approx. 35 minutes
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in Fig. 2.
3. Charging
When inserting a battery in the charger, charging will
commence and the pilot lamp will light continuously in
red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
5
English
-1
-1
-1
recharge as soon as
possible.
CH36DL
LBR NN
1 —
1 —
1 1
1 —
-1