Publicité
Les langues disponibles
Les langues disponibles
• Never use the device when there are people in the water.
• Always switch off all devices at the mains supply before maintenance.
• Prevent the Fish Feeder from falling into the water. Do not use the device if water damaged. The warranty
is invalidated in the event of improper use or water damage.
• This device can be used by children aged from 8 years and above, persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, if they have been given supervision or
instructions concerning the use of the device in a safe way and understand the hazards involved. Children
shall not play with the device. Cleaning and maintenance of the device shall not be done by children
without supervision.
• Modifications to the device may affect the safety. The warranty will also expire.
Function
With this automatic feeder you can automatically feed your fish. Feeding a smaller quantity of food on a regular basis has
a beneficial effect on the health of the fish and pond. Feeding several times a day ensures maximum growth of your fish
and beautiful colour patterns. Because the fish eat all the food, there will be less pollution of the water and it reduces the
load on the filter.
Installation
• Place the Fish Feeder in an accessible place above your pond so that it can be easily refilled with food.
Fig. B Fasten the bracket to a wall (e.g. post) using 4 screws (not supplied).
Fig. C Or fasten the bracket on the floor (e.g. on a deck) using 4 screws (not supplied).
Fig. D Make sure the Fish Feeder hangs completely level.
Fig. E Place the Fish Feeder in the bracket and feed the cable through the cable guide of the bracket.
Fig. A Connect cables of the controller and feeder to each other. Mount the controller with a screw on a wall, in a dry and
splash-free location.
Pellet size
• The Fish Feeder is suitable for pellets with a diameter between 2-9 mm.
Fig. F No reducer needs to be placed for large pellets (± 9 mm).
Fig. G For medium pellets (± 6 mm), the insert ring must be placed on the bottom of the container.
Fig. H With small pellets (± 3 mm), both reducers (insert ring and insert disc) must be placed.
• Fill the container with pellets (max. 7 litres) and place the lid. Attention: When filling an empty food container,
some pellets will fall out of the dispenser, if necessary you can collect them, for example by keeping the lid under
the fish feeder. Close the lid by turning it anticlockwise.
NOTICE! Make sure the food remains dry at all times. If the food becomes moist, the feeder may block and not
function correctly.
• Insert the plug into a grounded socket and test the Fish Feeder by pressing the controller's "manual" button. A
small amount of food will now be dispensed.
• Set the correct time on the controller and program the desired feeding times and amount of food (see
Programming). Use the feeding table on the packaging or in the back of this manual as a guideline.
5
Publicité
