SuperFish Koi Pro Fish Feeder Mode D'emploi page 6

Maintenance
• Disconnect the cable between the feeder and the controller.
• Clean the inside of the food container regularly with a brush and a dry cloth. Remove any caked food remains,
these can block the rotor, which can lead to damage and/or malfunction of the Fish Feeder.
Programming
With the Fish Feeder controller you can easily set between 1 and 24 automatic feedings per
day.
The quantity of food can be set (in steps), so you can vary the amount per feeding.
By pressing the 'Manual' button the Fish Feeder gives a small amount of food.
You turn the Fish Feeder on by plugging the plug into the socket.
Set the current time (clock)
Press SET during 3 seconds
Press (short) SET: the hours will flash
Press UP or DOWN to set the hours
Press (short) SET: the minutes will flash
Press UP or DOWN to set the minutes
Press SET to confirm the set time and wait for 8 seconds
The current time (clock) is set.
Setting the automatic feedings
Press SET during 3 seconds
Press UP: the display shows 01oN
(the Fish Feeder is set to one feeding at 10 am by default)
Press (short) SET to set the first feeding time: the hours will flash
Press UP or DOWN to set the hours
Press (short) SET: the minutes will flash
Press UP or DOWN to set the minutes
Press SET to set the food quantity in steps from 01 to 10
(01 is the setting for the smallest amount of food, 10 for the largest quantity)
Press UP for the next step (02, 03, 04, ....)
Press SET to confirm the first feeding
6
00:00
DOWN
SET
UP
manual
--:--
00:00
12:00
12:00
12:25
--:--
12:25
--:--
01 n _ �
10:00
08:00
08:00
08: 15
:01
:02
01 n _ �