Bradley Smoker BS1019 Manuel D'instructions Et D'utilisation page 26

QUICK REPAIRS
Only an authorized technician may work on electrical repairs on this appliance.
Bradley Technologies Canada Inc. accepts no responsibility for any malfunction or damage which is
caused by unsuitable electrical repairs.
Control display panel removal
When a faulty display needs to be changed, please follow these steps:
1. Turn off the power switch. See the Switch (9) location on page 7.
2. Disconnect the power cable from the electrical outlet.
3. Ensure adequate time to cool down the smoker after use.
4. Remove all the racks, bowls and the drip tray.
5. Remove the feeder tube and bisquettes inside.
6. Place the smoker down on its back on an even and flat surface.
7. Remove 2 screws from the bottom fixing plate
8. Open the side door and remove 3
Continued on page 27
( see illustration below ).
screw. ( see illustration below ).
rd
26 | P a g e