Kemper CleanAirTower Notice D'utilisation page 67

Pos. Designation
6 Connection terminal
7 Connection terminal
8 Connection terminal
12. Connect the plugs (M12) of the three solenoid valve cables to the terminals (Pos. 6, 7
and 8) of the connection block. The sequence does not matter here.
13. Connect the cable of the motor vibrator to the plug of the 4-pin socket (Pos. 10).
14. Connect the earth lead to the threaded bolt M4 (Pos. 9) and screw it on.
1502828-01
Fig. 31: Solenoid valve + motor vibrator connection
Tab. 18: Solenoid valve + motor vibrator connection
- 67 -
Pos. Designation
9 Threaded bolt for earth lead
10 Motor vibrator connection socket
EN