EINHELL BT-TS 1500 Mode D'emploi D'origine page 20

Anleitung_BT_TS_1500_SPK1:_
GB
We recommend that you clean the equipment
immediately after you use it.
Clean the appliance regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the
plastic parts in the appliance. Ensure that no
water can get into the interior of the tool.
10.2 Carbon brushes
Should there be excessive sparking, get the carbon
brushes checked over by a qualified electrician.
Caution: The carbon brushes may only be exchanged
by a qualified electrician
10.3 Maintenance
There are no other parts inside the equipment which
require additional maintenance.
10.4 Ordering replacement parts
Please provide the following information on all orders
for spare parts:
Type of machine
Article number of the machine
ID number of the tool
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
11. Disposal and recycling
The unit is supplied in packaging to prevent it from
being damaged in transit. The raw materials in this
packaging can be reused or recycled. The equipment
and its accessories are made of various types of
material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
20
14.05.2009 13:08 Uhr Seite 20