Publicité
Les langues disponibles
Les langues disponibles
Step 4:
Hydraulic cylinders assembly
1.
Attach the fi xed ends of the hydraulic cylinder to the U-brackets (35)
on the left and right-hand side frames (3+4) using bolts (23), washers
(8) and nylon nuts (15).Screw on the nut (15) until the self-locking part
of the nut engages on the thread of the screw (23) and the hydraulic
cylinder is not blocked.
2.
The position of the hydraulic cylinder (22) on each handlebar (24 & 25)
can be adjusted by slackening and re-tightning the adjustable knob
(31). The position governs the tension/Resistanco in the cylinders. The
higher the bracket (30) on the rowing handlebar the Greater the tension
resistance.
Step 5:
Checks
1.
Check the correct installation and function of all screwed and plug
connections.
Installation is thereby complete.
2.
When everything is in order, familiarise yourself with the machine at a
low resistance setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may
be required for repairs or spare parts orders becoming necessary later.
The computer switches of automatically approx. 4 minutes after training is
stopped. All values attained until the will be deleted.
12
Publicité
