INVENTOR PR-ION-20L Manuel D'utilisateur page 25

Why does
condensation
persist on
windows even with
dehumidifier's use?
Why am I not able
to set the desired
humidity level by
use of the control
panel?
How much time is
needed to dry my
clothes?
The dehumidifier is
not a chilling device.
What could be the
cause of cold air
being extracted?
Why does the
dehumidifier
operate a total of 9
hours under Dryer's
mode?
Why is the
dehumidifier
making some noise
from time to time?
Why does the
dehumidifier not
operate while the
humidity of the
room has increased?
EN
When the desired humidity level is reached, there is a
possibility of partial humidity formation on windows. This
occurs due to the temperature variation between the window
and the external weather conditions.
• Operating the dehumidifier should significantly reduce
condensation formation on windows.
In order to access the humidity "+' and "-" range settings, you first
need to press the "Mode" button, and have no led indication on
the control panel, hence Dryer, Cont., and Smart modes should
be off.
This will allow you to manually change the desired humidity level.
The exact time needed to dry clothes depend on many
factors, the room's temperature and size, the humidity level,
the moisture of the clothes etc., so there is no standard time
since of these variable factors mentioned above To shorten
the time period, place the dehumidifier in a small room with
all doors and windows shut. The smaller the room the more
efficient the drying operation will be.
The dehumidifier operates by intaking condensed air
removing any moisture and sending it back in the area it
operates. If you are standing near the dehumidifier while
operating you may feel that the air coming out of the fan is
cooler due to the diffusion. In reality, it is at the same room-
temperature but with less humidity.
The dehumidifier operates for a period of 9 hours under the
Dryer's mode function which is the appropriate period of
time to manage dry clothes and the desired humidity levels.
The dehumidifier will stop operating after 9 hours, in order to
avoid any excessive air dryness that may result in damaging
the clothes.
When the compressor starts or stops operating, the unit may
make a loud noise, it is normal.
When the set humidity is reached, the Energy Savings
function is automatically activated during which the digital
control display of the device may show increased humidity
levels. This is because the fan is not operating. After the
predetermined timeframe and if the humidity levels have
increased, the device will resume dehumidification.
25