Storage; Frequently Asked Questions & Troubleshooting - INVENTOR PR-ION-20L Manuel D'utilisateur

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 110

11. STORAGE

When the unit is going to be stored for an extended period of time, please make sure you follow
the instructions below, for the appropriate storage of your appliance:
• Turn the unit off allowing one day before storage, in order to allow the unit to drain properly.
• Remove the drain hose (if attached).
• Clean the removable parts of the device, water tank and air filter.
• Position and secure the power cord with its band opposite the dehumidifier.
• Cover the device.
• Store the dehumidifier in an upright position, in a dry and well ventilated area and avoid
direct sunlight.
12. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Are the
dehumidifiers
costly?
Where should the
dehumidifier be
placed ideally?
Can the air filter be
replaced by another
type of filter, such
as HEPA?
Which is the
appropriate room
humidity level?
24
For about the first month of use, the dehumidifier operates
intensively. This will gradually decrease within time, since
the dehumidifier will have been calibrated in its working
environment. Condensed households may sometime be
significantly expensive to heat. The use of a dehumidifier may
lower energy costs.
For optimal results, it is suggested that the dehumidifier
is placed in a central area. Doors within the household
should be open in order for the dehumidifier to enhance its
operation.
The dehumidifier's filter cannot be replaced by any other type
of filter since it is specifically designed to operate with this
unit.
Maintaining a proper home humidity level is essential
for your well-being and that of your household. Extreme
fluctuations cause adverse effects on both; low humidity
may cause respiratory problems and damage on wooden
doors, windows, and furniture, and make you vulnerable to
electric shocks due to increased static electricity. On the other
hand, high humidity may promote mold growth, serving as
breeding grounds for various bacteria and resulting in poor
health and also a damaged home. The ideal humidity levels
fluctuate between 45% to 55%.
EN

Publicité

Table des Matières
loading

Table des Matières