Publicité
Les langues disponibles
Les langues disponibles
EN
water heaters increases.
Caution:
the water temperature in the tank can cause immediate serious burns when the software runs the thermal
disinfection treatment. Children, disabled persons and the aged are particularly at risk of burns. Check
the water temperature before taking a bath or shower
DESCRIPTION OF THE WATER HEATER
(see figure 7)
F) LED
A) Cap
M) Adjustment keyboard
B) Water intake pipe
C) Water outlet pipe
TECHNICAL CHARACTERISTICS
For the technical specifications, refer to the nameplate (the nameplate is located next to the water intake/outlet pipes).
Product range
Weight (kg)
Oversink
Installation
Model
Qelec (kWh)
Qelec, week, smart (kWh)
Qelec, week (kWh)
11,436
Load profile
L
wa
η
h
w
Capacity (L)
The power consumption data in the table and the other information given in the Product Data Sheet (Enclosure A to
this manual) are defined in relation to EU Directives 812/2013 and 814/2013.
The products without the label and the data sheet for water heaters and solar devices, stipulated in regulation 812/2013,
are not intended to be used in such assemblies.
The device is equipped with a smart function that allows you to adapt the consumption to the user profiles. If operated
correctly, the device has a daily consumption of "Qelec*(Qelec,week,smart/Qelec,week)"less than that of an equivalent
product with no smart function".
This appliance is conforming with the international electrical safety standards IEC 60335-1 and IEC 60335-2-
21. The CE marking of the appliances attests its conformity to the following EC Directives, of which it satisfies
the essential requisites:
- LVD Low Voltage Directive: EN 60335-1, EN 60335-2-21, EN 60529, EN 62233, EN 50106.
- EMC Electro-Magnetic Compatibility: EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3.
- RoHS2 Risk of Hazardous Substances: EN 50581.
- ErP Energy related Products: EN 50440.
INSTALLING NORMS (for the installer)
CAUTION Observe all general warnings and safety standards listed at the
!
beginning of this text in full; all such instructions are obligatory.
The appliance must be installed and commissioned by a qualified technician in accordance with established
regulations and local health and safety regulations.
We recommend installing the appliance as close as possible to the delivery points to minimise heat loss along the
18
Product information
10
6,6
Undersink
Refer to the nameplate
2,548
2,490
9,930
-
-
38,4%
35%
10
15
7,4
Oversink
Undersink
2,634
10,199
11,878
XXS
15 dB
37,8%
15
30
12,8
Oversink
2,481
2,842
-
12,106
-
15,979
S
35,1%
39,2%
30
Publicité
