Preparing Your Wave - Bose WAVE SOUNDLINK Notice D'utilisation

Tab 8, 16 Tab 7, 15

Preparing your Wave

The SoundLink adapter connects directly to your Wave
TM
1. Plug the SoundLink
connector on the rear of the system.
Bose link
connector
2. Place the adapter in a convenient location. It does not need to be within view.
If the adapter is to the left of the system (as you face it), be sure the two are at least
2 in. (5 cm) apart to eliminate any interference with AM reception.
4
Tab 6, 14 Tab 5, 13
music system or Wave
®
adapter cable (with the words Bose link facing up) into the Bose link
TM
Bose link
cable
Tab 4, 12 Tab 3, 11
radio II for wireless
®
system.
®
Tab2, 10 English