Manually Linking The Soundlink; Customer Service - Bose WAVE SOUNDLINK Notice D'utilisation

English Tab 2, 10

Manually linking the SoundLink

You may be using a replacement SoundLink
ing the wireless connection. In either case you should link the USB key and adapter manually.
1. Using the provided SoundLink
the computer as the music source.
2. Press and hold the Presets 5 button on the remote control until DISCOVERABLE is
displayed and flashing on the Wave
3. With your computer turned on, lift the antenna on the
SoundLink USB key to the vertical position and plug the
TM
key into a USB port on your computer.
4. Press and hold the button on the USB key for more than 3
seconds until the light begins to flash. When the USB
power light changes from flashing to solid and the Wave
system emits a beep, linking is complete.

Customer service

For additional help in solving problems, see notes about the product at: Owners.Bose.com.
To contact Bose Customer Service for help, or to replace a lost remote control, see the phone
numbers on the inside the back cover of your Wave
Tab 3, 11 Tab 4, 12
TM
USB key or SoundLink
TM
remote control, press the SoundLink/AUX button to select
TM
®
system display.
Tab 5, 13 Tab 6, 14
adapter and USB key
®
® music system guide.
Tab 7, 15 Tab 8, 16
adapter or troubleshoot-
TM
Button
15