Beta 1879 Mode D'emploi page 5

INSTRUCTIONS FOR USE
A ) -
HOW TO USE THE HOSE
ø 5.3 x ø 6.7 NYLON HOSE - ø 6.7 x ø 9.8 ADAPTER - ø 7.8 x ø 9.8 NYLON HOSE
ø 3.5 x ø 4.5 NYLON HOSE ø 4.5 x ø 9.8 ADAPTER
B ) -
Fluid inlet
(1):28+29+30----FLUID SUCTION HOSE
(2):28+31+32----FLUID SUCTION HOSE
(3):33"'37---- BRAKE/CLUTCH SUCTION HOSE
C ) -
Turn anticlockwise to lock into place
D )
- IMPORTANT
Any fluid leaking from the safety valve is indicative of a defect. ( 1 )
Limit fluid drain line ( 2 )
Safety valve seat ( 3 )
E )
- FLUID DRAIN
STEP: 1 Turn clockwise to reverse movement
STEP: 2
WARNING
1) Please always wear safety goggles.
2) Keep out of the reach of children.
3) Do not use the unit to extract or store dangerous chemicals, poisons, acids, alkaline,
or solvents. If, by chance, liquids such as these are used in the unit, it must be immedia
tely drained, washed and cleaned.
4) Flammable liquids such as petrol, diesel or kerosene may be extracted or siphoned with
the unit, but they must not be stored in it.
5) Do not dismantle, tamper with or adapt the unit for any other purpose than what it was
originally intended for.
6) Do not drop, throw or mishandle the unit.
7) Do not store the unit or such tubes near or in areas of high temperature, direct sunlight,
rain or snow.
8) The vapours are flammable and caution should be used when extracting flammable
liquids.
9) The temperature of fluid should range from 1 °C to 95 °C when operating.
10) Corrosive and volatile fluids may seriously damage the gaskets in the product, if such
fluids are kept in the container.
Furthermore, the interior of the container should be cleaned after each use.
For extracting all types of engine oils, transmission fluids, lubricants from motor cars, motor
bikes, marine engines, stationary engines, large and small industry machinery as well as
lubricants such as water from fish tanks etc.
APPLICATIONS
STEEL WIRE
EN
5