Philips HR2357 Guide D'utilisation page 11

Put the shaping disc onto the disc holder ❶ , and make sure it is firmly fixed on the disc
4
holder ❷ .
Note:
• Make sure the inner cavity of the
shaping disc and disc holder is
properly fitted.
5
Attach the front panel to the main unit.
❶ Disc holder safety switch lever
Note:
• Make sure the front panel is completely fastened before
using the appliance.
• The front panel is heavy. Take extra caution when assembling
it.
6
Fasten the front panel control knobs.
Note:
• If the front panel or the shaping disc is not properly
assembled, the safety switch will prevent the appliance from
working.
7
Close the mixing chamber lid properly.
Note:
• If the mixing chamber lid is not properly installed, the safety
switch will prevent the appliance from working.
1 2
1
1
2
ENGLISH 11