EdilKamin MODO 2 Installation, Usage Et Maintenance page 29

To be integrated with a complete reading of the technical specifi cations
Positioning and installing
• Air vent in the room
• The fl ue/chimney must only receive the discharge from the stove
• The fl ue (section of duct that connects the stove to the chimney) only has sections with max 45° angles and no
horizontal sections
• Chimney pot that is high enough to avoid downdraft areas
• The discharge pipes are made of a suitable material (stainless steel is recommended)
• When using any fl ammable materials (e.g. wood), all precautions have been taken to prevent a fi re hazard
Uso
• The wood used must be good quality and not damp.
• The door is closed properly
• The discharge pipes and the interior parts of the combustion chamber are clean.
Thermostatic valve (Code 761080) to be installed by an
Edilkamin approved technical assistance centre.
GlassKamin
Used for cleaning the
ceramic glass
CHECK LIST
OPTIONALS
CLEANING ACCESSORIES
- 29
-
Ash vacuum cleaner
User for cleaning the hearth