INNOBIZ ELIA Notice D'emploi page 10

Maintenance:
1. Make sure that your device has been switched off.
2. Unplug the mains adapter (C) from the mains socket; then disconnect
the mains adapter (C) from the base (B) of your Elia.
3. Remove the top cover (A).
4. Empty out any water remaining in your Elia.
5. Use a cotton bud or soft, clean cloth to clean the inside of the device.
Take care not to press too hard on the ceramic disc (1) as this element is
fragile.
It is recommended that this cleaning process be carried out after every
3rd use.
Specifications:
- Mains operated, 100-240 V
- Dimensions: diameter = 150 mm, height = 65 mm
- On/off button included on the underside of the product
- Water level detector and automatic switch-off when the level is low
Distributed by INNOBIZ
300 H rue du Clos de Viviers – 34830 Jacou – France
www.diffuser-manufacturer.com
Model: ELIA - Made in PRC
10
en
en