Geberit AQUACLEAN MERA Instructions De Montage page 48

EN
4
Mount front cladding.
If the status LED flashes red:
• Switch off device, wait 30 seconds and
then switch device back on.
If the status LED continues to flash red
after taking these measures, contact
customer service.
48
Testing additional functions of the
Comfort model
Prerequisite
– When the detection range is entered: The
orientation light switches on.
1
Test lid lifting function for steady and low-
noise motion.
✓ When the detection range is entered: The
WC lid opens.
✓ When the detection range is left: The WC
lid closes after 2 minutes if no users are
detected during this time.
2
Test heating function of the WC seat.
✓ The WC seat steadily becomes
noticeably warm to the touch.
3
Test storage water heater status at the
lateral control panel.
✓ The LED lights up when you enter the
detection range.
✓ The LED switches off when you leave the
detection range.
54043197686759179-1 © 09-2018
966.729.00.0 (07)