Geberit AQUACLEAN MERA Instructions De Montage page 47

Resetting the storage water
heater
If the storage or transport temperature
exceeds 45 °C, the thermal cut-out will be
tripped.
Prerequisite
– The status LED on the lateral control panel
flashes red.
1
Demount front cladding.
54043197686759179-1 © 09-2018
966.729.00.0 (07)
2
Reset the thermal cut-out of the storage
water heater.
3
Activate the shower procedure.
✓ The device initialises after switching on.
The status LED on the lateral control
panel flashes blue.
EN
47