cleaning and care
s
Before you clean, move or store the appliance, please turn off the fan by pressing
the "On/Off"-button
the power jack on the appliance.
If you wish to disassemble the appliance, proceed as follows:
1. Remove the screws in the fastening ring and take the fastening ring and front
guard grille off. (See step 4 in the "Assembly" section)
2. Remove the plastic nut and the fan blade from the motor shaft. (See step 3 in
the "Assembly" section)
3. Unscrew the securing nut from the rear guard and remove the rear guard grille
from the motor shaft. (See step 2 in the "Assembly" section)
The outer parts of the fan should be wiped with a soft, damp cloth from time
to time. Never submerge the appliance in water and do not spray water into the
appliance!
Do not use aggressive or chemical cleaning agents, sharp or abrasive sponges or
other similar cleaning equipment.
Store the appliance in a dark, dry place.
54
;
, then unplugging the AC adaptor from the socket and from