SOLIS 753 Mode D'emploi page 45

im p o rta nt s af e ty pr ec aut ion s
s
Please read through this user manual thoroughly before using your
SOLIS fan, so that you become familiar with your appliance and can use it
safely. We thoroughly recommend that you keep these instructions and, if
you pass the appliance on, that you also hand these instructions to the new
owner.
For your own safety, please observe the following safety measures when using elec-
trical appliances:
1. In order to avoid electric shock, neither the fan, cable or the AC adaptor, may
come into contact with water, rain or other fluids. Water could seep into the
appliance and damage it! If the appliance, the cable or the AC power adaptor
come into contact with fluid, remove the plug from the socket immediately,
using dry, rubber gloves.
2. Before using the appliance, check that the voltage stated on the AC adaptor
matches your mains voltage.
3. The appliance must stand on a secure and dry surface during use. Do not place
the fan on unstable or textile covered surfaces. Ensure that the appliance is
stable, so that nobody will knock it over.
4. Lay the appliance where it will not be tripped over or where it could topple the
appliance. Ensure that the cable does not come into contact with any hot sur-
faces. Always unroll the cable fully before plugging the AC adaptor in.
5. Keep the appliance away from hot gas, hot ovens or other heat-emitting appli-
ances and heat sources. Do not use the appliance in rooms containing explosive
or flammable, gasses or liquids. Do not use the appliance in rooms with high
humidity, temperatures over 40 °C or in dusty rooms.
6. Never use the appliance on wet or hot surfaces. Keep the appliance away
from damp, heat and naked flames. Keep the fan away from moving parts or
appliances.
7. Never carry or pull the appliance by the cable and do not place anything on top
of the power cable.
8. Do not spray anything into the appliance – i.e. bug spray.
9. Unplug the appliance when it is not in use or unattended, and before cleaning.
We recommend the use of a residual current device (RCD safety switch) to en-
sure additional protection during the use of electrical appliances. It is advisable
to use a safety switch with a rated residual operating current of 30 mA maxi-
mum. For professional advice consult an electrician.
45