Palazzetti ECOFIRE IDRO Notice D'installation page 44

7.2 USING THE CONTROL PANEL
- The arrow buttons
- When selecting a given function, any submenus available can be scrolled using the
parameter simply use the
- The "annulla" button
active alarm or error codes.
7.3 OPERATING PARAMETERS
Stove operation is determined by the Power level and Temperature parameters set by the user.
7.3.1 setting the power level
consumption.
To change the power level use the
a) Use the
b) Select submenu "1
d) Press
7.3.2 Setting the temperature
a) Use the
b)
c) Press
storage tank.
7.3.3
To change the value of ventilation of the Everspring system:
a) Use the
b) The fan speed value will blink; modify the value by pressing
• "1" minimun,..., "5" maximum;
• "Auto" = automatic functioning (the stove will set automatically the fan speed and the stove power
according to the room temperature);
• "Hi" = ultrarapid functioning (to use only in the case you need to quickly heat the room);
c) press the button
44/13
USE AND & MAINTENANCE
are used to scroll between the different menus that are highlighted.
button and modify the values, again using the
goes back up one level in the menu; pressing and holding the button displays any
buttons to go to the power menu
buttons to scroll the submenu
buttons to go to the temperature menu
buttons to go to the fan menu
cod. 004772532 - 07/2018 - Palazzetti - PN - Italy
.
(buttons (1 minimum,....5 maximum)
and press
buttons
: setting this value changes the desired hot water outlet temperature.
and press ;
buttons; to set a
buttons. Pressing the
buttons.
;
;