Hints For Test Institutes - BORETTI BVW 96 Notice D'utilisation

88
Electrical connection - Voltage -
Overall power - Fuse
Water supply pressure
Capacity

Hints for test institutes

Testing in accordance with EN 60704 must
be carried out with appliance fully loaded and
using the test programme (see "Consump-
tion values").
Test in accordance with EN 50242 must be
carried out when the salt container and rinse
Amount of detergent required:
Rinse aid setting
Arrangement upper basket
Arrangement lower basket
Height cm
Depth cm
Information on the electrical connection is given on the rating plate
on the inner edge of the dishwasher door.
Minimum
Maximum
Place settings
Full load: 12 standard place settings
5 g + 25 g (Type B)
position 4 (Type III)
aid dispenser have been filled with salt and
rinse aid respectively and using the test pro-
gramme (see "Consumption values").
Arrangement cutlery basket
85,8 - 94,8
55
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
12