EINHELL BT-LS 610 Mode D'emploi D'origine page 18

Anleitung_BT_LS_610_610D_SPK1:_
GB
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.
1. Safety regulations
The corresponding safety information can be found
in the enclosed booklet.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
2. Layout and items supplied (Fig. 1-2)
1. Splitter
2. Trunk support
3. Hand guards
4. Control lever
5. Trunk support holder
6. Supporting foot
7. Wheels
8. Switch/plug combination
9. Motor
10. Transport handle
11. Trunk holding plates with securing screws and
star nuts
12. Chain for adjusting the splitter height
13. Screws for switch/plug combination
14. Axle
15. Washers for axle
16. Securing split pins for axle
17. Chain hook
18. 1 canister of hydraulic oil
19. Funnel
20. Motor circuit breaker switch
21. Velcro fastener (transport brace for control lever)
22. Safety catch
23. Screws for safety catch
24. Washers for safety catch
25. Locking rings for safety catch
26. Nuts for safety catch
18
26.01.2010 14:45 Uhr Seite 18
3. Proper use
The wood splitter is designed for splitting wood with
maximum lengths of 520/770/1040 mm and a
maximum diameter of 320 mm.
The trunk diameters given above are indicative only.
Thin pieces of wood can be very difficult to split if
they contain knot holes or have very tough fibers. On
the other hand, it may be possible to split thicker
pieces of wood if they have smooth and loose fibers.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data of the BT-LS 610
Voltage:
Power rating:
Idle speed:
Protection type:
Max. splitting force:
Splitting lift:
Splitting speed
Downwards:
Upwards:
Trunk holding capacity:
Diameter:
Length:
Oil quantity:
Weight:
Technical data of the BT-LS 610 D
Voltage:
Power rating:
Idle speed:
Protection type:
230 V ~ 50 Hz
2200 W
2950 rpm
IP 54
6 t
480 mm
0.032 m/s
0.12 m/s
50 -320 mm
100 -1040 mm
2.4 l
99 kg
400 V 3 ~ 50 Hz
2200 W
2950 rpm
IP 54