Built-In Player; Playing A Disc; Introduction Of Advanced Built-In Cd Player Operation - Pioneer DEH-P2900MP Mode D'emploi

Section
04

Built-in Player

Playing a disc

1 1 1
6 6 6
1 Folder number indicator
Shows the folder number currently playing
when playing a WMA/MP3/WAV disc.
2 Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
3 Track number indicator
Shows the track (file) number currently play-
ing.
! If a track number 100 or more is selected,
d on the left of the track number indica-
tor will light.
4 RPT indicator
Shows when repeat range is selected to cur-
rent track (file).
5 WMA indicator
Shows when a WMA file is playing.
6 MP3 indicator
Shows when an MP3 file is playing.
1 Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.
2 Press a or b to select a folder when
playing a WMA/MP3/WAV disc.
# You cannot select a folder that does not have
a WMA/MP3/WAV file recorded in it.
12
En
2 2 2
5 5 5 4 4 4
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
3 3 3
3 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on page 14.)
4 To skip back or forward to another
track, press c or d.
Notes
! Read the precautions with discs and player on
page 28.
! If an error message such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page 28.
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FRMTREAD is displayed.
! When playing CD-EXTRA or MIXED-MODE
CDs, WMA/MP3/WAV and CD-DA can be
swithced by pressing BAND.
! If you have switched between WMA/MP3/
WAV files and audio CD-DA, playback starts at
the first track on the disc.
! The built-in CD player can play back a WMA/
MP3/WAV file recorded on CD-ROM. (Refer to
page 29 for files that can be played back.)
! When playing back VBR (variable bit rate) re-
corded files, erapsed play time may not be dis-
played correctly.
! When playing WMA/MP3/WAV disc, there is
no sound on fast forward or reverse.
Introduction of advanced
built-in CD player operation
% Press FUNCTION to display the function
names.
Press FUNCTION repeatedly to switch be-
tween the following functions: