Repeating Play; Playing Tracks In Random Order; Scanning Tracks Or Folders; Pausing Disc Playback - Pioneer DEH-P2900MP Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Built-in Player
RPT (repeat play)—RDM (random play)—
SCAN (scan play)—PAUSE (pause)—COMP
(compression and BMX)—FF/REV (search
method)
# To return to the playback display, press BAND.
# If you do not operate the function within about
30 seconds, the display is automatically returned
to the playback display.

Repeating play

Repeat play plays the same track/folder within
the selected repeat play range.
1
Press FUNCTION to select RPT.
2
Press c or d to select the repeat range.
DSC – Repeat all tracks
TRK – Repeat just the current track
FLD – Repeat the current folder
# If you select another folder during repeat play,
the repeat play range changes to disc repeat.
# When playing CD, performing track search or
fast forward/reverse cancels the repeat play auto-
matically.
# When playing WMA/MP3/WAV disc, perform-
ing track search or fast forward/reverse during
TRK (track repeat) changes the repeat play range
to folder repeat.
# When FLD (folder repeat) is selected, it is not
possible to play back a subfolder of that folder.

Playing tracks in random order

Random play plays tracks in a random order
within the selected repeat range.
1
Select the repeat range.
Refer to Repeating play on this page.
2
Press FUNCTION to select RDM.
3
Press a to turn random play on.
RDM :ON appears in the display. Tracks will
play in a random order.
# To turn random play off, press b.
Note
If you turn random play on during FLD and then
return to the playback display, FRDM appears in
the display.

Scanning tracks or folders

Scan play searches the song within the se-
lected repeat range.
1
Select the repeat range.
Refer to Repeating play on this page.
2
Press FUNCTION to select SCAN.
3
Press a to turn scan play on.
SCAN :ON appears in the display. The first 10
seconds of each track is played.
4
When you find the desired track press
b to turn scan play off.
# If the display has automatically returned to
the playback display, select SCAN again by press-
ing FUNCTION.
Notes
! After scanning of a disc (folder) is finished,
normal playback of the tracks will begin
again.
! If you turn scan play on during FLD and then
return to the playback display, FSCN appears
in the display.

Pausing disc playback

Pause lets you temporarily stop playback of
the disc.
1
Press FUNCTION to select PAUSE.
2
Press a to turn pause on.
PAUSE:ON appears in the display. Play of the
current track pauses.
# To turn pause off, press b.
Section
04
13
En

Publicité

Table des Matières
loading

Table des Matières