Built-In Cd Player - Pioneer SUPER TUNER III D DEH-P3700MP Mode D'emploi

Section
05

Built-in CD Player

Playing a CD
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
2 Track number indicator
Shows the track currently playing.
1 Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
# You can eject a CD by pressing EJECT.
2 Use VOLUME to adjust the sound level.
Rotate it to increase or decrease the volume.
3 To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc. (Refer to Selecting the search meth-
od on page 16.)
4 To skip back or forward to another
track, press c or d.
Pressing d skips to the start of the next track.
Pressing c once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
14
En
! The built-in CD player plays one, standard, 12-
! Do not insert anything other than a CD into
1 2
! If you cannot insert a disc completely or if
! If an error message such as ERROR-11 is dis-
! When a CD TEXT disc is inserted, the disc and
Notes
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
the CD loading slot.
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press EJECT to eject the disc, and check the
disc for damage before inserting it again.
played, refer to Understanding built-in CD
player error messages on page 37.
track titles begin to scroll to the left auto-
matically.