Intended Use; Package Contents - Reely DIY X-79 Mode D'emploi

3. Intended use

The DIY drone construction kit (FY 605) allows you to build your own flying quadrocopter. Before commencing as-
sembly, familiarise yourself with these instructions and the workings of quadrocopters. Assembly is carried out with
plastic snaps and press fits. They should be easy to insert. Otherwise, check the correct alignment of the individual
components or consult a specialist in the event of uncertainty about the workings.
The product is suitable only for use in dry, still environments. Contact with moisture (e.g. in bathrooms) must be
avoided under all circumstances. Fly only in still conditions (maximum wind speed 18 mph = 29 km/h) and not too
close to fans or ventilators. Keep the drone away from sources of heat. Open heat sources can generate considerable
lift, which may lead crashes. Avoid flying over locked areas and bodies of water.
Observe national regulations for the operation of drones, etc. (URL: http://www.bmvi.de/SharedDocs/DE/Artikel/
LR/151108-drohnen.html ). Respect the personal rights of local residents and passers-by, in particular when using
models equipped with a camera.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the product for purposes
other than those described in these operating instructions may damage the product. In addition, improper use can
cause hazards such as a short circuit, fire or electric shock. Do not use any components that are not supplied in the
construction kit. Purchase only original spare parts from a specialised dealer.

4. Package contents

• 4 motors (two each A/B marked in colour)
• 8 propellers (2 sets of two A/B propellers)
• Drone base plate with cover cap
• Main board
• Operating instructions
• USB charging adapter with integrated charging logic
• Smartphone holder clamp (only for WLAN models)
• Flight battery (3.7 V 350 mAh LiPo)
• Camera (for corresponding models only)
• Remote control (with cover cap and battery compartment cover)
• Propeller disassembly tool and screwdriver
Check immediately after purchase to ensure that the construction kit is complete.
Up-to-date operating instructions
To download the latest operating instructions, visit www.conrad.com/downloads or scan the QR
code on this page. Follow the instructions on the website.
21