Signature SHD60PERI Instructions D'utilisation page 30

2/ The lower chimney bracket is used to fix the upper decorative chimney and lower
decorative chimney.
Use 2pcs 4x8mm screws to attach lower and upper chimney together. Before attaching
the bracket to the chimney, decide the location of lower chimney bracket fixing holes
for fixing the lower chimney bracket in the later step.
Do not fasten screws too much, make sure upper decorative chimney can be
telescopically adjusted after assembled.
3/ Place the plastic duct on the cooker hood.
3.1 Put the chimney on the cooker hood. Fix the lower chimney bracket on the wall
by 2 screws (4mm x30mm).
3.2 Then pulling out the upper chimney upwards to the target height. Adjust to reach
the height required.
3.3 Fix the upper chimney on the upper chimney bracket by 2 screws (4x8mm). Then
fix the upper chimney bracket on the wall. Before fixing the bracket on the wall, you
can decide the upper chimney bracket fixing holes for installation.
Upper decorative chimney
(Inner)
Lower Chimney bracket
Lower decorative chimney
(Outer)
-30-