Signature SHD60PERI Instructions D'utilisation page 32

If you do not have an outlet to the outside, exhaust pipe is not required and the
installation is similar to the one show in section "Installation (Vent outside)".
Activated carbon filter can be used to trap odors.
In order to install the activated carbon filter, the grease filter should be detached first.
Press the lock and pull it downward.
Plug the activated carbon filter into the unit and turn it in clockwise direction. Repeat
the same on the other side.
NOTE:
oMake sure the filter is securely locked. Otherwise, it would loosen and cause dangerous.
oWhen activated carbon filter attached, the suction power will be lower.
Installation (Vent inside)
-32-