Fulgor Milano F7PBM36S1-L Notice D'installation page 22

EN
• Finish off by mounting the central profile cover onto the
central profiles, by pushing it until a click is heard [ 5 ].
5
• Once completed, push the units into their final position
[ 6 ].
• If the units are to be installed inside a niche or within an
enclosed structure, it is necessary to accommodate air
flow at the back of the niche to assure proper ventilation
at the back of the unit of about 20mm. Always mount
front panels on door and drawer before pushing the unit
into its final position inside the niche or structure.
• Check the levelling of the appliance, adjusting its feet
and wheels to correct it.
• Secure the appliance to the adjacent cabinets by fixing
to these the side profiles trims factory-installed on the
appliance [ 7 ]. To make this operation easier keep the
door and the drawer open.
6
20
• Mount the covering frames onto the profiles, first insert
them laterally and then push firmly until a "click" is heard
[ 8 ].
7
WARNING
Take care as appliances will be front-heavy and may tip
before they are secured to the adjacent furniture.
8