Router Location For Connected Appliance Installation; Location Of 10-Character Said Code On Wi-Fi Module - Whirlpool W11449282C Instructions D'installation

A floor drain under the bulkhead. Prefabricated bulkheads
■
with electrical outlets, water inlet lines, and drain facilities
should be used only where local codes permit.
Recessed Area or Closet Installation
This washer may be installed in a recessed area or closet.
The installation dimensions shown are the minimum spaces
allowable. Additional spacing should be considered for ease of
installation and servicing. Companion appliance spacing should
be considered.
Minimum installation spacing
ROUTER LOCATION FOR
CONNECTED APPLIANCE
INSTALLATION
It is recommended to locate the Wi-Fi Router within the same
room as the installed appliance with direct line of sight between
installed Router and appliance.
LOCATION OF 10-CHARACTER
SAID CODE ON WI-FI MODULE
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
Wi-Fi Module is located behind the Fascia Panel.
1. Remove the two screws to allow the Fascia Panel to be rotated
outward from appliance.
in
in
2. Lay fascia panel face down on appliance top panel to provide
access to User Interface Control Board.
3. SAID code is printed on the Label located on Wi-Fi Module.
WARNING
Electrical Shock Hazard
5