Proper Use; Technical Data - Auerswald COMmander 6000 Notice D'utilisation

• You will find more information about protecting the system from misuse on the Internet
pages on the pages of the German Federal Office for Information Security (see
www.bsi.bund.de, with search term TK-Anlagen).

Proper Use

Important: The device is not designed or intended for use in life-support systems and/or
nuclear facilities. The device can only be used for these purposes with prior written
permission/clarification from the manufacturer in each individual case.
Improper use may, for example, cause functional restrictions or malfunctions, the
destruction of the device or, in a worst case scenario, personal injury.
• If you are still uncertain about how to use the product properly after reading the section
below, please contact your specialised dealer.
• Read the manuals for the device and keep them for future reference.
• In order to use some of the features, it is necessary to extend the hardware, to extend
the software (release), contact the network provider about activating the feature and/or
set up via the PBX configuration manager.
The COMmander 6000, COMmander 6000R and COMmander 6000RX devices are
telecommunication systems; they will be referred to as PBXs in the following. These PBXs
connect various internal devices with various public telecommunication networks, thereby
enabling external and internal calls. For this purpose, the PBXs provide a number of different
ports/interfaces. The PBXs are structured modularly. They are suitable for use in the
commercial sector (midsize companies).
The COMmander 6000 is a PBX with a plastic casing for wall mounting.
The COMmander 6000R and COMmander 6000RX are PBXs with a 19" casing available for
installation in a 19" rack. They are suitable for use in structured IT/telecommunication
networks.
The PBXs are intended to be operated in closed rooms. In addition, all of the devices
connected to the system must be located inside the building.

Technical Data

Power Supply
Rated voltage
Rated current
Protection class
Power
Expansion modules
COMmander 6000/R/RX - Instructions V11 11/2018
230 VAC +/-10 %, 50 Hz
COMmander 6000/R: max. 0.8 A
COMmander 6000RX: max. 1.6 A
I
COMmander 6000/R: max. 75 W
COMmander 6000RX: max. 230 W
Power supply from the PBX
Important Information
41