First Setup; Information About The Network Connection; Opening The Configuration Manager And Configuring Basic Settings - Auerswald COMmander 6000 Notice D'utilisation

First Setup

Warning: Incomplete or incorrect configuration can be hazardous to people, if for
example emergency calls cannot be performed.
• The configuration of the product is made via an integrated web server whose pages are
called via web browser. The user interface of the web server (Configuration Manager) is
available in English and German. If you are not familiar with these languages and the
technical terms, please consult a specialist who is linguistically and professionally
qualified.

Information about the Network Connection

Configuring the PBX using a PC is done using the Configuration Manager integrated in the
PBX. It can be accessed via the IP address of the PBX. The IP address to be used depends
on your connection and network environment.
• If the PBX is not connected to a router but is connected directly to a single PC which
receives its IP address automatically (default setting on Windows and Mac OS X), you can
access the PBX via the permanent IP address 169.254.1.240 from the APIPA address
range.
• If the PBX is connected to a PC or router that belongs to the same network as the PBX,
you can access the PBX via the permanent IP address 192.168.0.240 (subnet mask:
255.255.255.0, gateway: 0.0.0.0, DHCP client: switched off)
Important: If you want to operate the PBX in a network where a router as DHCP server
allocates IP addresses to the connected devices, you must first adapt the IP configuration
of the PBX for operation in the network. For this purpose, you must first create one of the
connection and network environments described above. It is not possible to change the
network configuration by phone without prior activation of the system.

Opening the Configuration Manager and Configuring Basic Settings

Requirements:
• PC with a min. screen resolution of 1024 x 768
• Recommended Browser: Mozilla Firefox (current version), Google Chrome (current
version)
• Valid unblocking code
1. Enter the IP address of the PBX in the address field of the browser. Example for entering
the permanent IP address: https://169.254.1.240.
Since the PBX forces an HTTPS connection, your browser will provide a security
warning (because of the missing security certificate).
2. If necessary, transmit the security certificate to your working environment (user and
browser profile).
COMmander 6000/R/RX - Instructions V11 11/2018
First Setup
61