GRE Mariposa Manuel D'installation page 35

Masquer les pouces Voir aussi pour Mariposa:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

1) SANITATION METHODS AND RECOMMENDED CHEMICALS
Gre in order for you to perform the correct maintenance program for your mini-pool recommends using the
following chemicals:
› GRANULAR DICHLOR 56% for the first treatment and for shock treatments and ordinary maintenance.
› 20 gr BROMINE/CHLORINE TABLETS, for ordinary maintenance.
› GRANULAR pH, for the reduction of pH values in the pool, to achieve water balance and to reduce the
possible formation of limescale.
› EXTRA LIQUID ANTI LIMESCALE, to be used to protect the mini-pool pump and coverings from damage.
2) HOW TO TREAT THE WATER OF YOUR MINIPOOL
INITIAL TREATMENT:
use GRANULAR DICHLOR 56% in the dose of 30 gr.
ATTENTION do not immerse your in the water if the chlorine concentration in the pool is too high. Always
test the chemical values of your mini-pool with a dedicated instrument to make sure the ideal levels have
been reached before entering the pool.
ATTENTION: do not cover the pool with any type of cover (standard, isothermal or otherwise) following the
INITIAL TREATMENT or similar SHOCK TREATMENT, as there is a risk of causing damage to the minipool
and/or to the cover itself.
SHOCK TREATMENT:
to be carried out with 30 gr GRANULAR DICHLOR 56% in the following cases:
› Restoring of ideal levels in case of insufficient maintenance.
› Intensive use of the mini-pool.
› Complete or partial replacement of the water.
› To break down all types of bacteria or algae that may have become resistant to normal sanitation levels.
TREATMENT FOR MAINTAINING OF IDEAL CHEMICAL LEVELS
Use Bromine/chlorine tablets or Granular Dichlor 56% in the recommended doses shown on the printed labels
of chemical products. For the calculation consider that the basin contains approximately 1.1 m
of water.
3
Correct the pH values in water with a dedicated pH- GRANULAR reducer or GRANULAR pH+ incrementer, in
order to always achieve and maintain the ideal pH values: 7.2 - 7.6. The doses to be introduced are reported
on the stamped labels of the chemical products.
The achievement and maintaining of the ideal levels of Bromine/chlorine or chlorine and pH must take place
within the recommended values during the entire period of use of the mini-pool, with the sole exceptions of
the initial treatment and/or shock treatment phases.
33

Publicité

Table des Matières
loading

Table des Matières