Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT
• Before carrying out any work on the mini-pool, be sure to have disconnected the power supply.
• The power supply must always be protected by a high sensitivity differential switch. 30 mA
• In any case always avoid coming into contact with the electrical voltage; for this reason never
access the electrical components when wet and have all maintenance operations carried out only
by qualified personnel.
• Any modification that is intended to be made to the equipment and systems requires the author-
isation of the manufacturer. The manufacturer is exempted from any responsibility for damage
caused by the use of non-original and unauthorised spare parts or accessories.
• The user must ensure that assembly and maintenance work is only carried out by authorised and
qualified personnel.
• Installation of the minipool must always be carried out according to the regulations in force in
each individual country, especially those concerning electrical safety.
• This mini-pool can cause a risk of flooding, so it must be installed in an area designed for draining
of the water that could exit the pool at any point around it due to:
› excessive filling;
› splashes caused by the movement of users in the pool;
› emptying operations;
› the possibility of accidental hydraulic leaks from the mini-pool;
› the minipool must also be installed in a dry place that is not subject to flooding.
• The minipool must be installed in a space that allows easy access to all its components.
• Safety in operation of the minipool is only guaranteed if all the warnings provided in the assem-
bly instructions and in this use and maintenance manual are respected.
• Regularly check all the accessible surfaces and the integrity of the pool's structural parts to
avoid injury or damage.
SAVE THESE INSTRUCTIONS TO CONSULT THEM AT ANY TIME
27
Publicité
Table des Matières
