Kapro Prolaser Multi Beam Manuel D'utilisation page 12

Working in Pulse mode with a detector:
For outdoor work under direct sunlight or bright conditions,
and for extended indoor ranges up to 50 meters, use the
pulse mode with a Detector. When the pulse mode is
activated the laser beams will flash at a very high
frequency (invisible to the human eye). This will allow the
detector to detect the laser beams.
1. The pulse mode can be activated both in Automatic and
in Manual mode.
2. Turn on the laser level (to the required mode).
3. Press the Pulse mode button (c) to activate it. The Pulse
mode indicator (d) will turn on. Visually, the intensity
of the beam will be reduced slightly.
4. Turn on the detector and search for the laser beam.
5. You can choose a different beam, by pressing on the
beam selector button (a), while you are in Pulse Mode.
6. To switch the Pulse Mode off, press the Pulse mode
button (c) and the Pulse mode indicator (d) will turn off.
12