Heat Pump Controls; Unit Set Up; Setting Temperature Set Point; Unit Start Up - Astralpool 54068-MB Manuel Technique

ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM ASTRALPOOLHEAT SERIES · AIR/WATER SYSTEM
5.2. 5.2. HE

HEAT PUMP CONTROLS

AT PUMP CONTROLS
5.2. 5.2. HE HE AT PUMP CONTROLS AT PUMP CONTROLS
See IMAGE 6 (page 186) to see a detailed description of the heat pump controls.
5.3. 5.3.

UNIT SET UP

UNIT SE
5.3. 5.3. UNIT SE UNIT SE
Select Pool, Spa or both by pressing
Each one, Pool and Spa, have its own temperature set point.
Note that pool-spa is optional equipment.
Select Comfort or Filtration mode: This option is located inside Users Menu. Press
navigate down by pressing
filtration by pressing or
5.4. 5.4.

SETTING TEMPERATURE SET POINT

SETTING TEMPERATURE SET POINT
5.4. 5.4. SETTING TEMPERATURE SET POINT SETTING TEMPERATURE SET POINT
Temperature set point can be changed at any time (as long as outside Users Menu):
Pressing will raise temperature set point.
•
Pressing will lower temperature set point.
•
Keep in mind that a set point temperature change affects only to the current mode the unit is
operating on; for instance, if unit is heating Spa water, changes on set point will only affect to
Spa temperature set point; Pool temperature set point will remain unchanged.
5.5. 5.5. 5.5. 5.5.

UNIT START UP

UNIT START UP UNIT START UP UNIT START UP
When the unit has been connected to a power supply the green led illuminates to indicate that
the unit has power.
Once Set up process is completed, press
Green light will start flashing, indicating that the unit has been turned on.
Press again to enter economic mode: The default economic mode is ECO. If EOM mode is
to be used, first has to be activated on technical menu, as well as its efficiency grade.
Press again to STOP the unit.
This constitutes the operation loop.
Display will leave any screen to the default information screen after a given time period, or Display Display Display will leave any screen to the default information screen after a given time period, or will leave any screen to the default information screen after a given time period, or will leave any screen to the default information screen after a given time period, or
if the if the MENU MENU key is pressed key is pressed
if the if the MENU MENU key is pressed key is pressed
5.6. 5.6. 5.6. 5.6.

USERS MENU

USERS MENU USERS MENU USERS MENU
On User menu, operation modes can be selected, as well as other parameters:
Operation Mode Selection: Select Comfort or Filtration mode.
•
Languaje Selection: Select from English, Français, Deutch, Castellano, Italiano and
•
Portugues.
Temperature Scale Selection: Select Centigrade or Fahrenheit scale.
•
To enter User menu just press
The first screen shown is the software version of the heat pump.
To navigate through user menu screens, just press
© ASTRALPOOL 2015 ALL RIGHTS RESERVED. PROPRIETARY DOCUMENT
UP
UP UP
.
until operation mode screen appears; then select Comfort or
.
to power on the unit.
key on the control display.
to move down and
.
ENGLISH ENGLISH ENGLISH ENGLISH
, then
to move up.
Pag: 16