Cleaning The Drip Tray; Storing Your Machine - SOLIS GRIND & INFUSE PRO 115A Mode D'emploi

CARE AND CLEANING

CLEANING THE DRIP TRAY

The drip tray should be removed, emptied and
cleaned at regular intervals, particularly when the
drip tray full indicator is showing «Empty Me!».
Remove grid, compartments and «Empty Me!»
indicator from the drip tray. Dispose of the
grounds from the dry compartment into the bin.
Wash the drip tray with warm soapy water, using
a non-abrasive washing liquid, rinse and dry
thoroughly. The «Empty Me!» indicator can be
removed from the drip tray by pulling upwards to
release the side latches.
The drip tray base and cover are dishwasher safe.
CLEANING THE STORAGE TRAY
The storage tray can be removed after the drip
tray is removed then cleaned with a soft, damp
cloth (do not use abrasive cleansers, pads or
cloths which can scratch the surface).

STORING YOUR MACHINE

Before storing the appliance, turn it off with the
POWER button, turn the hot water/steam dial to
Standby and pull the plug.
Remove unused beans from the hopper, empty the
water tank and the drip tray.
Ensure the machine is cool, clean and dry. Insert all
accessories into position or into the storage tray.
Store upright. Do not place anything on top.
WARNING:
DO NOT IMMERSE POWER CORD, POWER
PLUG OR APPLIANCE IN WATER OR ANY
OTHER LIQUID. THE WATER TANK SHOULD
NEVER BE REMOVED OR COMPLETELY
EMPTIED DURING DECALCIFYING.
E
171