Cleaning And Maintenance - SOLIS MULINETTO PLUS 1610 Mode D'emploi

▲

CLEANING AND MAINTENANCE

1. Before cleaning, pull the plug and let the appliance cool down.
2. Remove the lid. Turn the milling container in a counterclockwise direction to
remove it from the appliance base.
3. Clean the milling container with the blade and the lid with a soft towel or brush
in warm dish water. Then, dry the milling container and the lid on both the inside
and the outside with a soft, dry towel. Alternatively, you can clean the milling con-
tainer in the dishwasher.
4. Please make sure not to touch the blade with your hands, you could cut your-
self!
5. Clean the appliance base with a slightly wet towel and dry it.
6. Never submerge the appliance base, the power cord or power plug in water or
other liquids and do not spray water or other liquids onto the appliance parts.
Risk of electric shock!
Do not use any aggressive cleaners or solvents or abrasive materials on any
of the appliance parts. These might damage the surfaces.
▲
STORAGE
• When not needed, the coffee grinder should be disconnected from the power
and then be cleaned and dried.
• The power cord should be stored in the cord wrap.
• Store the cool, clean and dry appliance in an upright position, best in the origi-
nal packaging. Do not place any objects on the appliance.
46