Installation Procedure - Toto THP733 Manuel D'installation Et D'utilisation

1. Disassemble drain cover from
the drain body flange.
2. Push the flat gasket on the drain
from below upward to the top of
the drain body.
3. Insert the drain body down
the drain hole from above the
lavatory.
NOTE: Ensure that the flat
gasket is underneath the flange
of the drain body and between
the lavatory and drain as shown.
4. While holding the drain body in
place, push the bottom gasket
up the drain body from below
the lavatory.
Important: Ensure the drain
overflow hole stays in line with
the lavatory overflow channel
after assembly.

INSTALLATION PROCEDURE

Drain cover
Flat gasket
Drain body
Thread
Lavatory
overflow
channel
3
Flat gasket
Drain overflow hole
Thread
Bottom gasket