SOLIS ULTRASONIC HYBRID 7214 Mode D'emploi page 65

▲ ▲
S TA RT I N G UP
1. M OU N T I NG D E CA L CIF Y IN G CA R T RIDGE
A N D F I LL I N G T HE TA N K WIT H WAT E R
– Remove cover (2) with outlet nozzles (ig.1).
– Use the handle to lift the water tank and turn it around (ig. 2).
– Unscrew the cap (8) of the water tank (ig. 3).
– Screw the decalcifying cartridge, pre-soaked in water for 24 hours, clock wisely
into the threads in the inside of the cover (ig. 4).
– Completely ill the water tank with fresh, 10 °C–40 °C warm tap water.
CAUTION: Always ill the water into the water tank, never pour it directly into
the nebulisation chamber (except when cleaning).
– Close the water tank by clock-wisely turning the cap with the decalcifying car-
tridge on it. The sealing ring should be positioned correctly (ig. 5).
– Turn the water tank back around and correctly replace it on it's base (ig. 6).
ig.1
ig. 4
ig. 2
ig. 5
ig. 3
ig. 6
65