Installing The Siren; Choosing The Best Place To Install The Siren; Testing The Radio Range; Fixing The Siren In Place - DAITEM SH402AX Notice D'installation

GB

5. Installing the siren

5.1 Choosing the best place to install the siren

iMPoRtAnt: make sure there is a distance of at least 2 metres between each product, except
between two detectors.
The siren should preferably be placed:
• at a height,
• far away from possible sources of electrical interference (electricity meter, telephone box,
etc.).
never fix the siren to a metal wall.

5.2 Testing the radio range

Before fixing the siren in place, test its radio range in the chosen location by putting it there.
if the test is satisfactory, fix the siren in place. otherwise, move it to a different location.
1. Press the test button.

5.3 Fixing the siren in place

1. Remove the tamper mechanism washer
located at the back of the base.
2. The control panel
issues the message:
Detachable tamper
mechanism washer
102
"bip, siren X"