DAITEM SH402AX Notice D'installation page 105

The siren also provides vocal indication of faults following a command issued from a control
unit:
Commands
Disarm
Disarm group
Arm with time delay
Arm without time delay
Armed Partial 1 or 2
with time delay
Armed Partial 1 or 2
without time delay
Arm Presence mode
Arm Group with time delay
Arm Group
without time delay
System status
• example 1, the siren's battery
is indicated to be faulty
following a control panel
System Status command:
• example 2, exit 3 has not
been closed and this is
indicated following a control
panel Armed Partial 1
command:
Vocal messages
"bip, off.... alarm system or Fault system"
"bip, off..."
or
"bip, off Group X... alarm system or Fault Voltage siren or Fault system"
"bip, armed... exit opened or exit inhibited or Faults system
or Faults Voltage siren"
"bip, armed... exit opened or Fault system"
"bip, armed Partial 1 or 2... exit opened or exit inhibited or Faults system
or Fault Voltage siren"
"bip, armed Partial 1 or 2 ... exit opened or Fault system"
"bip, armed Presence... exit opened or Faults system or Fault Voltage siren"
"bip, armed Group X... exit opened or exit inhibited or Faults system
or Fault Voltage siren"
"bip, armed" or "bip, armed Group X... exit opened or Fault system"
"bip, off, Fault system"
"bip, armed Presence, Fault system"
"bip, armed, exit inhibited"
"bip, armed Partial 1 or 2 ... exit opened or Fault system"
"bip, armed Group ... exit opened or Fault system"
"Bip, system status,
armed Partial 2, bip, 12/03
at 12:00, Fault system"
Bip, armed Partial 1,
bip, 12/03 at 12:00,
exit 3 open"
105
Bip, armed Partial 2,
bip, Fault system"
"Bip, armed Partial 1,
bip, exit open"
GB