Using The Bluetooth - DAITEM 191-21X Guide D'utilisation

GB
The red LED on the detector flashes quickly for 90 seconds to indicate a
new sequence of recorded images. This indication is repeated 10 times in
a row with each detection.
The sequences can be retrieved in two ways:

• using the Bluetooth

• by inserting the microSD card into a computer drive.
1. Using the Bluetooth
IMPORTANT
• To retrieve image sequences via the Bluetooth
must be fitted with this technology.
• IPhone model cannot be used for this function because its Bluetooth
function is not compatible.
1. Disarm the control panel.
2. Create a new contact (do this only once) called img-det-daitem (use
the same syntax) in the phone directory without associating it with a
telephone number.
3. Activate the telephone's Bluetooth
4. Search for Bluetooth
5. Select the detector called DET_IMG xxxxxx (xxxxxx corresponds to
the detector identifier).
6. Enter the "0000" code to associate the detector.
7. Send the img-det-daitem contact via Bluetooth
detector automatically sends back the recorded images to the phone.
8. Check the recorded images using the phone's image or photo folder.
9. If you wish, you can deactivate the phone's Bluetooth
Example with a "Samsung PlayerOne" phone: :
1. Go to the telephone directory and create the new contact
img-det-daitem making sure you reproduce the exact syntax. Do not
associate it with a telephone number.
2. Select this contact then press on the "Plus" menu.
3. Press "Send contact information" then select "Bluetooth
telephone's Bluetooth
automatically appears at the top of the telephone.
feature on a mobile phone,
®
feature on a mobile phone
®
devices near the telephone.
®
feature is automatically displayed. The logo
®
12
link, the mobile phone
®
application (refer to manual).
®
®
to the detector. The
feature.
®
". The
®
®