Delayed Alarm Sounding Upon Intrusion; Duration Of Sounding; Sound Level Of Arm And Disarm Command Indications; Transfer Of Arm And Disarm Command Indications - DAITEM SH402AX Notice D'installation

4.1 Delayed alarm sounding upon intrusion

Siren alarm sounding can be delayed by 60 seconds maximum. This gives users enough
time to disarm the system before the alarm siren sounds if, for instance, they have pressed
the wrong button. To delay sounding, enter:
siren n°
Factory setting: 0 s
4.2 Duration of alarm sounding
To modify the duration of sounding, enter:
siren n°
Factory setting: 90 s

4.3 Sound level of arm and disarm command indications

For greater user-friendliness, the sound level can be increased or decreased. To do this,
enter:
siren n°
Factory setting: 4 = average

4.4 Transfer of arm and disarm command indications

To modify the transfer of indications, enter:
siren n°
Factory setting: 2
from 0 to 60 s
from 20 to 180 s
from 1 to 8
0: disabled
1: sounding
2: vocal message ("bip, bip, bip, bip, off or armed")
97
GB