simultaneously, the latter will take priority.
3.
Up to four time bands can be set for each day, but their start and end times must coherent (the be-
ginning of one period must be later than the end of the previous period).
4.
If the unit is switched on manually, the period timer programs will not be implemented.
5.
If the relative function is activated (paragraph 8.3), the value of this parameter will be stored in the
memory and automatically reset after any possible voltage failure.
6.
The default value for this function is "Off".
4.16.
Deleting current errors (Error reset)
This function is used to reset any errors active on the system. This operation must only be performed after
having resolved the alarm condition signalled. To reset the alarms, press on the function label and then
confirm with "OK" in the dialogue box.
NB: this function can only be performed if the unit is switched off.
4.17.
WiFi connection reset function (Wifi reset)
This function is used to reset the WiFi connection, eliminating any conflicts.
4.18.
Loading the default settings (Reset)
This function is used to load the default values (values pre-set in the factory) for all functions by resetting
the changes made by the user.
NOTES:
1.
This function can only be performed if the unit is switched off.
2.
This function interacts with the "Temp. timer", "Clock timer", "Preset mode", "Weekly timer" and
"Weather depend" functions.
5.
PARAMETER MENU
5.1.
Navigating the menu
This menu is used to set the machine adjustment
values. The following keys are used to navigate this
menu:
(
) Move back to the previous page
1
(
) Move on to the next page
2
(
) Go back to the higher level menu
3
(
) Go back to the main page (Home);
4
To access a function, click on the text of that
function.
NB: while navigating the menu pages, the current page of the selected menu will be displayed in the
header (i.e. in the darker upper area).
20
Parameter (1/2)
3
O C
l:
C
O
at:
C
1
C
l:
C
at:
C
at r ta
:
C
4
2