Commission (Parameter); General; Switching The Unit On And Off (On/Off - Olimpia splendid SHERPA MONOBLOC S1 E 6 Mode D'emploi Et D'entretien

2.5.

Commission (Parameter)

Page Content
T HP max
1 Cool run time
Heat run time
2.6.

General

Page Content
Temp. unit
On/off memory
1 Beeper
Back light
Time&Date
Language
2
WiFi
3. BASIC FUNCTIONS
3.1.

Switching the unit on and off (On/Off)

To switch the unit on or off, press the flag shown in the
figure; once this is done, the system will ask for con-
firmation of the switching on or off through another
window where the on/off command can be confirmed
or cancelled.
NOTES:
1. Once the voltage supply has been connected for
the first start-up, this function will be set on "Off".
2. If the relative function is activated (paragraph
8.3), the value of this parameter will be stored
in the memory and automatically reset after any
possible voltage failure.
8
16:41
Function Parameter View
Paragraph
7.19.
7.20.
7.21.
Paragraph
8.2.
8.3.
8.4.
8.5.
8.6.
8.7.
8.8.
2017-05-04 Fri.
Commission General