Publicité
Les langues disponibles
Les langues disponibles
Technical Data
Hot air weed killer
Art. No
Service connection
Rated input
Air volume
Level 1
Level 2
Air temperature
Level 1
Level 2
Weight
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
Safety Warnings Hot air weed killer
This appliance can be used by child-
ren aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a safe way and under-
stand the hazards involved.
Children shall not play with the
appliance.
Cleaning and user maintenance
shall not be made by children wit-
UVH 2000-600
hout supervision.
94401
WARNING: Switch the device off
when it is not in use.
230 V ~ 50 Hz
2000 W
Danger of fire if not used properly!
Take care if using the device in the vicinity of combus-
500 l/min
tible materials. Do not direct the device towards the
500 l/min
same place for long periods.
Do not use the device in rooms with a potentially
50 °C
explosive atmosphere.
600 °C
Do not use the device in rooms in which easily flam-
0,9 kg
mable material or gases may be present.
Heat can be conducted to combustible materials that
are concealed.
Do not leave the device unattended while switched
on.
Do not use the device outside if it is raining.
Never cover or close the hot air nozzle.
Do not point the hot air flow at people.
Do not use the device as a hair dryer.
Allow the device to cool down for a while after use
before packing it away.
Keep all body parts away from the heating element
and the heat shield (including the nozzle). Do not
touch any hot surfaces before they have cooled down
completely.
Carry the device by the handle when the heat shield
(including the nozzle) has cooled down.
Hold the power tool by the insulated handle surfaces
only, since the heat shield (including the nozzle) may
come into contact with concealed power lines or the
power tool's own power cable.
Always keep the power cable away from the
machine's nozzle.
The connecting line or other combustible materials
must not come into contact with the hot parts of the
device.
Unsuitable extension cables may be dangerous. If
an extension cable is used, it must be suitable for
outdoor use and the connection must be dry and
situated above ground level. It is advisable to use a
cable reel that keeps the socket at least 60 mm above
ground level for this purpose.
Switch the device off before removing it from the fire
to avoid flying sparks.
ENGLISH
11
Publicité
